Phrozen’s clear resins produce highly transparent models with ease, allowing you to print optical and other see-through models or prototypes that don’t turn yellowish during the post-curing process.
Viscosity: 142 cps
Tg: 73 °C
Elongation: 17 %
Break Value: 12 MPa
Surface Hardness: Shore 70D
I-Zod Impact: 2.68 KJ/m2
Weight: 1kg per bottle
XY Resolution: 0.075 mm
Layer Height / Parameter: 20 sec @ 50 um (Phrozen Shuffle / Make ParaLED)
Key Performance: Highly transparent resin. Not easy to yellowish in post-curing. Recommend to use low power UV curing light to do post-cure.
Ways to Rinse: Use alcohol spray to clean models and dry it by air gun. Do not immerse printed part into alcohol over 30 sec.
Compatible Printers: Phrozen 3D Printer Series
Applications: Optical part, transparent models.
Way to Rinse: Clean with alcohol spray with air gun. DO NOT immerse model into alcohol for long time.
Use and preserve resins in room temperature, and in dark and ventilated conditions
Shake well before each use
After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with a new resin.
Keep resin away from kids and away from direct sunlight exposure
Wear gloves and masks during operation of resins. Wash with plenty of water if you get direct skin contact or eye contact with resins.
DO NOT dump resin. Please cure it and treat it as general plastic garbage.
After receiving your Phrozen resins, we strongly recommend you finish it as soon as possible as unopened resins only have a shelf life of one year